HELP NEEDED Problems with Water and Fire

Discussion in 'Mapping Questions & Discussion' started by PokemonTrainerWesley, Aug 21, 2016.

  1. PokemonTrainerWesley

    PokemonTrainerWesley L1: Registered

    Messages:
    12
    Positive Ratings:
    0
    So time to ask about another problem.

    When I run my map, ALL OF THE WATER is invisible. Even if it isn't touching anything. (as shown by pictures of me swimming in the air) However, when you go into the water, it looks like you're actually underwater.
    I've tried using cubemaps, but those didn't help with my problem.

    And the fire also doesn't show up, it's invisible, but damages you if you stand near it (which I also do not want, as the fire will just be used for detail)

    I've tried to take screenshots of as many screens which may contain useful information.
     

    Attached Files:

  2. ades

    ades L4: Comfortable Member

    Messages:
    165
    Positive Ratings:
    54
    leak?
     
  3. PokemonTrainerWesley

    PokemonTrainerWesley L1: Registered

    Messages:
    12
    Positive Ratings:
    0
    I found what was leaking, that fixed the water, but not the fire. Thank you much ;)
     
  4. killohurtz

    aa killohurtz Distinction in Applied Carving

    Messages:
    1,003
    Positive Ratings:
    1,155
    Even though env_fire is available in TF2's FGD, it doesn't actually work properly in this game. You'll have to use particles to create fire instead.
     
  5. PokemonTrainerWesley

    PokemonTrainerWesley L1: Registered

    Messages:
    12
    Positive Ratings:
    0
    Thank you for the tip!