Capture Point Help

Discussion in 'Mapping Questions & Discussion' started by Jazz, Mar 9, 2008.

  1. Jazz

    Jazz L5: Dapper Member

    Messages:
    240
    Positive Ratings:
    23
    Hey people, I am having some troubles with my capture points. When I test my map, all three of them are locked, when only the second and third points should be locked...

    http://www.no-moral.com/settings.png

    That is a picture of my settings for all three of my control points and my master control point. Does anybody know what I am doing wrong here?
     
  2. dirtyminuth

    dirtyminuth L5: Dapper Member

    Messages:
    221
    Positive Ratings:
    14
    I believe you must set the "RED Previous Required Point 1" and "BLU Previous Required Point 1" for the capture1 CP to "capture1". In other words, the control point must require itself.
     
  3. l3eeron

    l3eeron L8: Fancy Shmancy Member

    Messages:
    594
    Positive Ratings:
    85
    I have a cp map with locked CP's and the only thing I have different is the cp_master....

    I use the index on the individual cp's to determine the layout. In the cp_master Cap Layout is blank. Try deleting that and recompiling.
     
  4. Brandished

    Brandished L5: Dapper Member

    Messages:
    234
    Positive Ratings:
    293
    I made this for a tutorial I'm working on, but you can use it as a reference if you want. It's a basic three control point map, middle must be captured first.

    http://www.mediafire.com/?f5yzwarv0wt
     
  5. Jazz

    Jazz L5: Dapper Member

    Messages:
    240
    Positive Ratings:
    23
    Hey, it worked! Thanks for the help.