Working beep boy *

Working beep boy * 2017-08-05

Yotts

L1: Registered
Jul 19, 2016
8
20
Working beep boy * - a modeled and 3d printed beeb boy case for a rasberry pi

This jam has turned into a comedy of errors due to user error.


Day 1

My original plan for the jam was to model, print and paint a cleaners carbine. This idea was highly ambitious, but I was optimistic that I could do it. What I did not take into account was the fact that I would not have enough time to print all the parts with the filament that I had. This project would also have taken more than 72 hours of working time to complete correctly and modeling the carbine was taking much longer than I anticipated. After almost 6 hours of working on the project, I got ready to print the first piece only to realize I was experiencing a filament shortage and didn’t have enough material to print the weapon.
xbDts9z.png

Because of the lack of materials I had to change my project for the jam. I saw online people who made a raspberry pi act as a steam link and decided to make a case for a raspberry pi allowing me to play tf2 on a beep boy.

I got a hold of an old calculator and after ripping off its screen, I was able to get the dimensions of the beep boy. After getting it scaled correctly I modeled the case to allow access to all the ports that I use while hiding the ports as best as I could.
6Gm1wtu.jpg

11nENIf.jpg

DDY2VPl.png

HvqOou8.png

At this point it was way later then I was planning on working so I called it a night.


Day 2

After some sleep I printed the faceplate to the beep boy. I had the printer on the wrong settings and used the setting for a different filament so the first attempt to print was a failure.
hmUSuRT.jpg

The second attempt to print the beep boy was a success. It took slightly over 3 hours to print and immediately away the print finished, I began sanding it smooth. After spending about an hour sanding it. I went to test fit the screen and I then realized that I forgot to take into account the wall thickness making all my work more or less useless.
CGK30hJ.jpg

XbfrQoh.jpg

The only way to correct this problem was to scale the entire beep boy larger, however the screen was the limiting factor. What I ended up doing was scaling the entire beeb boy by 10% to fit in the screen but keeping the screen the unscaled size. This made the beep boy’s screen 10% too small so I increased the chamfer around the edges of the screen to make the empty space feel less empty. I am now printing the third attempt for the front cover of the beep boy.
 

Void

Local Man Unable To Map, Sources Say
aa
Sep 14, 2008
1,865
2,972
Really cool to see physical submissions to the Jam, especially crafty things like this. Looks great!
 

Ixy

L2: Junior Member
Jan 29, 2016
75
67
Every Jam I've participated in seems to be a comedy of errors. I've learned to embrace it as part of the Jam experience! At any rate, this is a very creative and ambitious idea. The second attempt looks pretty decent! How did the third attempt go?