Dedicated server

Paddy

L1: Registered
Dec 24, 2007
40
0
Hi guys!

i was trying to use the dedicated server from the tools section of steam to test my very first map, just to see wot it would be like with other people, but i dont now how to get my map onto it! can anyone help?

Thanks

Paddy
 

Crimson

L3: Member
Nov 25, 2007
119
1
To get your map into it, place the .bsp file here...
\Steam\steamapps\youremail@email.com\source 2007 dedicated server\tf\maps

For other players to be able to join, you will need to make sure that port is not blocked by your router. When I run it, it is port 27016 so I had to open that port in my router settings.
 

MacNetron

L5: Dapper Member
Dec 12, 2007
203
47
well, to connect to your router, type its ip in a brower. The ip should be like: 192.168.1.1 (as it is in my case (Linksys)).
Then add the port (27016) to the section Port Forwarding and add the ip of the dedicated server (so the router knows where to send all traffic on that specific port).

EDIT: you do have a router?
 

ryodoan

Resident Bum
Nov 2, 2007
409
117
Ok, I didnt know what the heck a BT home Hub was so I did a quick google search and this page popped up: http://www.frequencycast.co.uk/homehub.html

You are going to need to do a couple things to let people connect to your computer if you want to use it as a dedicated server.

  1. Find out your external IP address.
    • (this varies widely, but is NOT 192.168.~~ go here: http://whatismyip.com/ )
    • You need this to tell other people what to connect to.
  2. Find out the port the TF2 server wants to use (sounds like 27016, but I think you can change it). You need this to configure your router.
  3. Find out your host computers local IP address
    • (probably something like 192.168.1.5). You probably need this to configure your router.
    • You can find it by going to Start->Run->cmd then typing "ipconfig" (no quotes) into the command line. It should pop up with your local ipaddress and some other gibberish.

Once you have those 3 things in hand, scroll down on http://www.frequencycast.co.uk/homehub.html until you reach "Home Hub Configuration".

From there I quote:
You can connect to your Home Hub to check status and alter settings via your PC's web browser - Go to http://bthomehub.home/. Once you've logged in to the BT Home Hub, you need to go to the 'Advanced' section. Here, you'll find the following sections:

Configuration: Contains the following:

  • * Wireless - Set up the Hub's wireless settings : SSID , speed, channel, encryption (WEP, WPA-PSK or WPA)
  • * Telephony - BT Broadband Talk settings
  • * Internet - Info on your Internet connectivity. This includes your username and password - note that be default this is "bthomehub@btbroadband.com" (with no password) - these details aren't actually needed as authentication is done using your phone number
  • * IP Addresses - Here you can enable/disable DHCP, define a DHCP pool, and set the Hub's IP addresses and subnet mask.
  • * Devices - Shows the status of connected devices
  • * Application sharing - Allows you to assign port mappings (translation of incoming packets for a port range, to a local port range). More
  • * Firewall - Allows you to select levels of protection. More
  • * Dynamic DNS - Allows you to use a service such as DYNDNS so that machines outside your network can get your IP address

System: Allows a reset, restart, and the option to set the Home Hub to get the time automatically (Enter up to 5 NTP servers). Also has the 'Remote assistance option to allow BT Support to connect in

Status: Info and access to a access to a number of event logs, including a call log and intrusion detection log

You are interested in two major things out of that quote. Both of which I have highlighted, underlined, bolded, and made italic. You want to open the correct port (probably 27016) and assign it to your computer (probably something starting like 192.168.*.*)

Then, once all that is configured, go to steam and try to connect to your ip address (you might need to put the port after your IP address, I cant remember the correct syntax off the top of my head though)
 
Last edited:

Intraman

L4: Comfortable Member
Nov 4, 2007
191
0
I have question.
How do you add custom maps to the available maps? All I can choose are the Valve maps.
 

Crimson

L3: Member
Nov 25, 2007
119
1
Once the server is up and running just go to the console and put in changelevel intramansmap.bsp
 

drp

aa
Oct 25, 2007
2,273
2,628
move the compiled bsp file in to your maps folder. but hammer should do that automatically.
 

Crimson

L3: Member
Nov 25, 2007
119
1
I don't think it will load it from the maps folder that hammer places it into automatically. I am almost positive you actually have to move it to the maps folder in the source 2007 dedicated server\tf\maps directory as well. The dedicated server executable does not look into the players map folder for maps, but into its own map folder.
 

Intraman

L4: Comfortable Member
Nov 4, 2007
191
0
OK, I got that working but now when I try to configure my router nothing seems to happen. I go to Start>Run ipconfig and a window pops up and then disappears. Would I have to do it from my houses "main" computer?
 

ryodoan

Resident Bum
Nov 2, 2007
409
117
OK, I got that working but now when I try to configure my router nothing seems to happen. I go to Start>Run ipconfig and a window pops up and then disappears. Would I have to do it from my houses "main" computer?

Well, first off its Start->Run cmd

then type into the black dos window, "ipconfig"

This will give you your local IP address. If you have a router you will have a local and an exterior IP address.

To give more specific instructions for you Intraman I will need that local IP address and what type of router you have, if you have a router.
 

Crimson

L3: Member
Nov 25, 2007
119
1
go to 192.168.1.1 in your web browser. If you have not changed the settings, I think its either root/root or admin/admin or one of those without a password. You can just do a quick search for stock linksys login.

Anyways, once on your router page, go to Applications & Gaming, put a start and end IP address (mine for running a server is 27005 and 27016, protocol both, 192.168.1.100 which is my local IP, change it to whatever yours is, and check enable and you should be good to go.
 

Intraman

L4: Comfortable Member
Nov 4, 2007
191
0
umm.. Now I'm just really really confused. When I put "192.168.1.1" into my browser it just gives me the standard "Page cannot be displayed" error. And when I do a search for "stock linksys" in google I get pages about hacking routers and stuff.

OK. After the help from Buster on the chat, I think I got it working. I just gotta see if anyone can join.
 
Last edited:

ryodoan

Resident Bum
Nov 2, 2007
409
117
I saw you asking about getting "One of those cool ip address forwarding" websites, I have one set up for the chat logger, http://caffeinesystems.ath.cx is my home IP address, you can go to http://dyndns.com and make an account, then you probably want to look into setting up a dynamic DNS address, but I dont remember the exact steps and I think they made it a little more confusing now... heh