Coaldust

PL coaldust a9

Blobolob

L1: Registered
Apr 16, 2012
37
2
Map attempt number two, I've shelved “pl_Launchpit” for now in favour of something simpler but I shall return to it :)

This is the first stage of three, the other two are just on paper but I fancied taking a map to a more polished stage, just for the practice.

Known issues so far;

Quite a few objects still need clipping planes (the many, many windows for instance)

Lighting needs refinement in most areas.

Concerns over confusing the player, the line of freight wagons are the maps southern edge, I don’t want to put a more obvious barrier there but need to make sure people figure out its a no go zone.

Couple of lines of sight that may be excessive (from the engine shed to the coal hopper filling magig)

Not yet started sculpting the ground other than the spilled coal hoppers.

The world geometry wagons that make Blu's start gates are stand-in for some I intend to build in Maya or Blender, I’m familiar with Maya but Blender looks like it’s got more support, any recommendations?
 
Last edited:
Sep 1, 2009
573
323
You have all these repeating windows which firstly is quite boring and secondly is very 'cluttery'. I think I just invented a new word D:
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
Good point :) ill edit them in the next version, there placement was more "Cover that wall in something" more than anything else :)
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
Yes they are, though still a work in progress. I still need to make the curved sections or, more likely, burry the track using displacement geometry. I want the train yard to look very old and out of use. (Otherwise the bomb track won’t make any sense on top of the railway line track)
 

colacan

L5: Dapper Member
Apr 14, 2012
235
85
For an out of use trainyard, there are a lot of trains I must say. The filled "gutenwagens" can better be replaced by boxcars because loaded trains would not be put there.
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
You have a point there, though it would depend on how quickly the yard was abandoned, and what period.

Flatbed wagons might work, but then I don’t know why they would be there on a coal loading line? Boxcars don’t make sense to me either, unless they were pushed there to clear the main line I suppose.

The disadvantage of using boxcars that I see is it will increase the height of the walkway that the coal wagons currently form, if anything I'd like to lower that slightly, and it will add to the confusion that the boxcars are the southern boundary of the map.
 

colacan

L5: Dapper Member
Apr 14, 2012
235
85
I think I would be able to make empty versions of it. Put some planks on top to keep the walkway and done. I'll see if it's possible.
 

Deodorant

L6: Sharp Member
Oct 31, 2011
263
214
This is extremely detailed for an alpha. Normally people just make the basic shapes with dev textured block, occasionally throwing in a prop if it fills a specific gameplay purpose (partially transparent barriers for example) until they've reached the beta stage. I mean, you wrote that you're doing it for practice and it doesn't really harm the map in any way, but you'll have to be prepared to delete huge chunks of it and rebuild them from scratch.

I started out doing the same thing, by the way. I made a pretty much fully detailed map. I then realized some of the many things I had done wrong (no playtesting, no adherence to any decent scale, frightening misuse of proppery, et cetera), and had to build a completely new map from scratch with the same layout.
Ah, and I've repeated the 'scrap everything and rebuild the map from scratch' process... around 2.5 times since, I think. I was pretty glad I stuck to basic devcolored shapes those times.
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
I appreciate the offer colacan, but it’s something I’m hoping to do alone. I've been reading up on a few bits on the import process and things like that. Any help you could offer with regards to advice would be greatly appreciated though.

Bellow is hopefully an image of my first attempt, I'm concerned the polly count will be way to high but its unwrapped, I just need to paint it up properly. I thought I should priorities getting my mapping ability up to scratch before getting these done though :)

coalwagon.JPG


Actually, one major question, I'm yet to see anything about the scale of the models and how it’s done correctly? I'm worried I’m going to make something and import it only to find it’s either bigger than the map or the size of a shoe. :D

Thanks for the advice Deodorant, I know it’s allot riskier doing things this way and potentially quite frustrating when things don’t work out. I've already chopped out quite a bit of the map, that first area was twice as long on my first version, looked great as a rail yard but snipers had some lines of sight the full length so I had to cut that down.

It’s going to be a bit odd, but if this section is ok, I’ll be building the other two sections using the dev textures, mainly because I want to try something a little different game play wise, so it’s likely to be changing a lot. :S

With regards to scale, is there any mapping convention for the heights of rooms for HL2 the rooms were always 128 in your average house or something similar. But it looks to small in TF2 so I've been increasing that to 192 (one and a half dev textures if I’ve got the numbers wrong)

Cheers
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
Not much mapping done, still want to get the first stage playtested.

I've been working on my modeling instead so not totally inactive. Well, texturing and importing. (cant really show you importing until I finish :) but this is the cart now)

progress.JPG


If its any help to anyone else, the guide seems pretty good so far, though im not all the way through it yet. (Maya 32 bit, that set me back a while)

http://www.moddb.com/engines/source...stom-props-for-source-powered-games-with-maya

(I'm not sure if its allowed to post links to other community webpages, if not, please just remove it or tell me to remove it)
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
Just watched the Demo file, sorry I couldnt make the gamenight.

I thought I'd fixed the black room thing already (a friend was kind enought to act as guniepig) so im not sure whats going on there.

It wont let me load the pointfile to check for leaks, so im not sure how to go about fixing it. Just to clarify, Nodraw doesn't seal a map, right? I dont think I have any of them left where they might be causeing a leak error either way.

As for the programming issue and out of phase cart, I'll fix them asap. I'll try do somethign about the bottle neck after second point as well. Maybe reduce spawn times for blue as well as add more time on for the second point.

Anyway, thanks for the feedback :)
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
Ok thanks.

I dont think I have any func_details sealing the map, but maybe a few clipping out of the map? will that effect it? (wheels going through the floor, that sort of thing).

Oh also, displacement geometry, it doesnt seal the map or is it just its not solid to dead people / dropped weapons?
 

Blobolob

L1: Registered
Apr 16, 2012
37
2
So I thought you all might get a laugh out of this. I've been trying to learn the importing pipeline for my Maya miningcart, and got stuck at the point of getting the texture to load on it in the model viewer, I've manage to make the .vtm .vmt files but no success so far.

Anyway, to cheer myself up, I thought I'd see what the pink boxy cart looked like in the map, to you know, have some level of success and cheer myself up at the textures utter failier.

Anyway the result is this.

lol.JPG


Parhaps I could make it into a rolerskate or something :D

If anyone knows of a good tutorial thats relitively up to date and for Maya > source or any other program infact, Id really appreciate it. I've been using the one bellow, its good, it got me this far, but its for maya 2008 and its talking about halflife files and directories, not orange box tf2.

http://www.moddb.com/engines/source...stom-props-for-source-powered-games-with-maya

Ill be exporting a sourse model I think as a size comparison before I start modeling again, like was sudjested :)

Thanks
 

Toxindude

L3: Member
Aug 2, 2012
103
4
I only looked at the pics. Judging off that I think the sky and lighting should be brightened up. It feels gloomy to me. Do you plan on painting the ground so it isn't all the same that can change the feel and look to. The buildings feel like blocks with window models on them maybe add some exterior framing down the corners of the buildings for detail. I like the idea still lots of work to do I can see :) Keep on mapping.
 

colacan

L5: Dapper Member
Apr 14, 2012
235
85
Scale up the cart model in Maya. Or import another model from TF2 for reference.
The textures need to be in the right place, make sure the QC and VMT files are set up with the correct file paths.