Cheese Shop Props

Model Cheese Shop Props v3

boomsta

L2: Junior Member
Mar 27, 2016
72
269
Cheese Shop Props - Useful for cheese shops.

please download here http://puu.sh/qs4Yc/674a11a0f7.zip

cheesepromo.png
 
Last edited:

Pocket

Half a Lambert is better than one.
aa
Nov 14, 2009
4,694
2,579
You can tell a well-textured TF2 prop when you can't tell if a picture is a fullbright screenshot of the prop itself or the concept art.
 

Pocket

Half a Lambert is better than one.
aa
Nov 14, 2009
4,694
2,579
Actually, now that I've gotten them into Hammer, I do have an issue with your texture work on a technical level: The actual textured parts don't run far enough over the edges of the UV, and the compression has created green splotches at the edges that strongly resemble mold.

Some general advice regarding texture work: One, always try to color outside the lines a bit if you can, even if it means shrinking your UV unwrap to make margins; and two, try to avoid VTFEdit's built-in "sharpening" settings, which just oversaturate the contrast around edges, creating "glowy" bits wherever color touches black. (Coffee machine turned out fine, by the way, in spite of all this; I pulled it up just now because I suspected I'd find problems and it checks out.)

Also why do the whole and cut wheels not share any skins? I'd have made them all available on both for maximum variety.
 

boomsta

L2: Junior Member
Mar 27, 2016
72
269
Actually, now that I've gotten them into Hammer, I do have an issue with your texture work on a technical level: The actual textured parts don't run far enough over the edges of the UV, and the compression has created green splotches at the edges that strongly resemble mold.

Some general advice regarding texture work: One, always try to color outside the lines a bit if you can, even if it means shrinking your UV unwrap to make margins; and two, try to avoid VTFEdit's built-in "sharpening" settings, which just oversaturate the contrast around edges, creating "glowy" bits wherever color touches black. (Coffee machine turned out fine, by the way, in spite of all this; I pulled it up just now because I suspected I'd find problems and it checks out.)

Also why do the whole and cut wheels not share any skins? I'd have made them all available on both for maximum variety.


There is plenty of room on the uv. Not sure why it is green for you because its fine to me. Also for the cheese thing I guess I just got lazy I guess. Updated it for both versions to have all textures.
 

Pocket

Half a Lambert is better than one.
aa
Nov 14, 2009
4,694
2,579
I'm talking about stuff like this:

Ow7iCnB.png


See that edge? It gets worse when you zoom out even further. Just letting the textured part bleed a little more into the black would fix this.

(Also the update doesn't appear to have taken; I'm still only seeing the original skins.)
 

Pocket

Half a Lambert is better than one.
aa
Nov 14, 2009
4,694
2,579
Why can't you update the download on this site?